JOTAFLOOR GLASS FLAKE
Jotafloor Glass Flake
This is a two component amine cured reinforced epoxy glass scale. This product is a paint that can be painted in high thicknesses and has a high percentage of solid volume. This product is a high performance paint. This product is specially designed as abrasion and abrasion coating for surfaces that are subject to severe conditions. If slip resistance is required, Jotafloor Non Slip can be used in the paint system. Can be used as an intermediate and finish coat in atmospheric environments. Suitable for use on approved primers on concrete surfaces.
Suitable for a wide range of floors with different levels of mechanical and chemical exposure. Specially designed as part of a complete paint system for heavy traffic, such as ramps, parking lots, stops, sidewalks and industrial floors. Recommended for use in warehouses, car repair shops, repair workshops, manufacturing plants, laboratories, aircraft repair workshops, wineries
The product can be applied by Spray: Use an airless sprayer. Roller: Can be used for small areas. Conditions during application: The surface temperature must be at least 10 ° C and at least 3 ° C above the dew point of the air, climatic conditions measured in the vicinity of the surface. . Good ventilation is required for enclosed areas to ensure a good dry film. Moisture content should not exceed 4% (by weight). The paint film must not be exposed to oil, chemicals or mechanical stress until fully cured.
Mixing ratio (by volume)
Do not mix separately for this product. Use a slow speed stirrer with a suitable paddle. Pour all product onto the floor immediately after thorough mixing. The temperature of paint and curing agent should reach 18 ° C or higher when mixed together.
Jotafloor Glass Flake Comp A 3 parts
Jotafloor Glass Flake Comp B 1 part
Thinner / cleaning solvent Thinner: Jotun Thinner No. 17
This product should be stored in accordance with national regulations. Store the product in a cool, dry place, in combination with good ventilation, away from heat and ignition. Containers must be tightly closed. Shipping with care.