Waterproofing additives and bonding agents
Description
SUPER LATEX is produced on the basis of modified white milk PolyStyrene Butadiene emulsion. Products are mixed with cement to act as a binder between the old – new concrete layer and or mixed with cement / sand mortar to increase the waterproofing ability of the mortar, etc.
Physical and chemical properties
No. Technical index Quality level
1 Liquid product form
2 Colors Milk white
3 Solid content,% 30 ± 3
4 Density of 25 ° C,
 kg / liter 1.00 ÷ 1.05
Application
1. Acting as an old – new concrete connection agent.
     *Mixed rate:
1 liter SUPER LATEX + 1 liter Clean water + 4 kg of Cement
This homogeneous Latex mixture is applied to about 4m2 of concrete surface.
      * Construction instruction:
Slowly pour the cement into the ready-made SUPER LATEX + bucket of water. Mix the mixture well until homogeneous. Latex lake is covered on the old concrete surface (the surface has been cleaned from grease, dirt, dirt, stone, … and has been moistened) with a thickness of about 1.0 -1.5mm afterwards. Apply a new layer of concrete or new mortar.
2. As a waterproofing agent for screeds and renders
     * Mixed rate:
Mix 01 liter SUPER LATEX with 03 liters of clean water to get a solution, then this solution is mixed with cement / sand mortar according to the ratio:
         + Cement: Sand = 1: 2.5 -3.0 (by weight, sand in moist surface conditions).
        + Or Cement: Sand = 1: 3.0 -3,7 (by volume, sand in surface moist conditions).
Depending on actual construction conditions to adjust the viscosity of the mortar mixture.
* Construction instruction:
  Plaster plastering with SUPER LATEX while the latex layer is still damp. Note carefully plastered holes, honeycomb holes in the surface.
Advantages
– Good adhesion
– Reduce mortar shrinkage.
– Good waterproof ability
– Non-toxic
Cleaning tools and equipment
Equipment and tools after work are cleaned with clean water before the material hardens
Safety instructions
The product is alkaline, easily cause skin allergy. Wear appropriate protective equipment, eyeglasses, and gloves during application
Storage
Store in a cool, dry place with shade. Avoid moisture, direct sunlight on the material.
Expiry date
SUPER LATEX stores for 12 months from the date of manufacture in its original condition and properly preserved
Pack
5L or 20L / BOX